FAQ PM4
|
Problem |
Signal – Cause |
Remedy |
|
| The machine does not turn on |
The machine is not plugged in |
Plug in the machine |
|
|
The main switch is positioned on “0” |
Move the main switch to “I” |
||
| The machine does not dispense drinks | Internal switch (21) is positioned on “O”. |
The keypad has been locked |
Open the front door and move switch (21) into position “I”. |
|
Internal switch (21) is positioned on “I”. |
An error has been made in the programming of beverage quantities. | Repeat the drink programming procedure (See section 8.1). | |
| The machine emits an intermittent acoustic signal. |
Automatic filling has been enabled. |
The mains water supply has not been connected. |
Check the mains line connection. |
| Whoever is using the machine is filling the tank manually. | Set the machine correctly (see section
6.2) |
||
| The machine cannot fill the tank within the time set in the factory. |
The tube is defective. |
Check the connection tube. |
|
|
Electronic system fault. |
Contact a maintenance engineer or specialized technician. | ||
